Loading
ホームデータベースアイテム #549355

To LOVEru Darkness - Lala Satalin Deviluke - 1/6 (Max Factory)To LOVEru Darkness - Lala Satalin Deviluke - 1/6 (Max Factory)

To LOVEru Darkness - Lala Satalin Deviluke - 1/6 (Max Factory)
カテゴリー
オリジナル
キャラクター
原材料
スケール & サイズ
1/6  H=265mm (10.34in, 1:1=1.59m)
発売日
11/14/2018 As Standard
価格
¥12,778 変換 USD

購入

コメント223

面白いコメント
32pt
Knight-Hart (1年前) #18561792Let's just agree to disagree, because it doesn't really matter and it's unlikely that we'll come to a conclusion. I've simply said my opinion as someone who's worn them.

Much more important debate.

https://tskbxt.com/toilet.png
1年前
Recent Comments
1pt
Looking to buy from the Uk pm me~
2時間前
0pt
In stock @ Anime NPC ($122.36)
Limited Offer: Product Page
◉ Shipping Worldwide
◉ Handle your order with care!
◉ 100% Authentic and Insured mail
1pt
marseille (6日前) #45264986I have the impression that the left hole in your picture is slightly smaller, so maybe that is the cause of your problem. I took some pics from my headpieces for reference: imgur.com/a/dud...

Okay, so the pins on the hair pieces look pretty much the same as mine on yours, so the different positions on the tiara piece must be by design. Maybe it's to hold it in place better, with the heavier plastic veil attached to it. The hole on the left side of the head definitely looks bigger on yours, so it must be an issue with the figure itself then, not the hair pieces.
6日前
1pt
Torzir (6日前) #45253605That is something I hadn't considered before. I've taken a picture of the holes on her head. Do they look any different to yours?
imgur.com/a/y7E...
I have the impression that the left hole in your picture is slightly smaller, so maybe that is the cause of your problem. I took some pics from my headpieces for reference: imgur.com/a/dud...
6日前
1pt
marseille (7日前) #45232013
If you don't mind me answering, I've checked mine and the two hair pieces do have a different pin alignment. However, I didn't have problems fitting them on Lala's head and I think that's because the "slots" on the head are large enough, so even if the pins are misaligned, they still fit in the hole. So maybe, your problem is not on the pins but on the slots on her head?


That is something I hadn't considered before. I've taken a picture of the holes on her head. Do they look any different to yours?
imgur.com/a/y7E...
6日前
1pt
I got mine yesterday. She's my first one on the "Venus series" and boy she's beautiful! The sculpting and painting is just awesome! The hair with all those separate strands is quite impressive! (and scary to handle too... ^^)
The veil is indeed a bit more "floaty" on the top compared to the prototpye, so it might look a bit weird if you look from the sides, but honestly it doesn't bother me much. Many people were worried about her face, but I think she turned out perfect!
Now, exchanging the hair pieces was bit of a nightmare for me, because it's hard to find a place where you can have a good grasp of it (so scared to break some hair tip.. ^^;). Fortunately, I didn't break anything and once removed, it seems to be easier to exchange.

Torzir (11日前) #44888931You wouldn't mind looking at the two hair pieces to see if there are any differences in the pin connector alignments would you? So far I've received two defective tiara pieces where the pins don't line up, so it doesn't connect to the figure properly. If you don't mind me answering, I've checked mine and the two hair pieces do have a different pin alignment. However, I didn't have problems fitting them on Lala's head and I think that's because the "slots" on the head are large enough, so even if the pins are misaligned, they still fit in the hole. So maybe, your problem is not on the pins but on the slots on her head?
7日前
1pt
Got her today. Must say, her cheeks don't look as puffy as the prototype suggested them to be.

I'm pretty happy with the result.
7日前
1pt
Finally arrived and she is beautiful. ;D
Now only Yami is missing to complete the set! :(
7日前
さらにコメントを見る